SERVICE MANUL
EWF1070M
EWF1070W
Washing Machine
２１
Error message:Temperature sensor is not properly connected or damaged (display at the end of a program).
Troubleshooting:
N
Check if drain pump acts by touching
pump position
Y
Check if drain pump or
drain pipe is jammed, and
open the filter and clean
N
Cut off the power and choose spin program to
start, then check the import voltage of drain
pump, is it between AC 220-240 V?
Y
Replace drain pump
N
Cut off power and pull out water level
pressure switch wire connection. Set spin
program to start. Check the export voltage
to drain pump, is it between AC
220-240V?between blue wire and green
wire
Y
The wire between
computer board
and drain pump
is not connected
properly.
Replace the wire.
Replace PCB
Cut off power and measure the resistance
of temperature sensor by multimeter, is
it between 5-14k
Ω
?
Y
NTC exist open circuit .Replace it
N
Y
Check if NTC is connected properly
Connect NTC well
N
N
Check the blue wire and black wire of NTC, are
they connected well?
Connect all wires well
Y
Disconnect the white wire and black wire
from computer board, and measure if the
resistance between blue wire and black wire of
PCB is it infinite?
N
Y
Replace wire
Replace PCB
文件使用
"pdfFactory"
试用版本创建
www.fineprint.cn
