40 use
Altering an option or a running
programme
It is possible to change any option
before the programme carries it out.
Before you make any change, you must
pause the washing machine by pressing
the
“Start/Pause”
button.
Changing a running programme is
possible
only by resetting it
. Turn the
programme selector dial to
“O”
and
then to the new programme position.
The washing water in the tub will not
emptied out. Start the new programme
by depressing the
“start pause”
button
again.
Interrupting a programme
Depress the
“start pause”
button to
interrupt a programme which is running,
the corresponding light starts to flash.
Depress the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to
“O”
to cancel
a programme which is running. Now
you can select a new programme.
Opening the door after the
programme has started
First set the machine to pause by
pressing the
“start pause”
button.
If the
“door”
light flashes and after 2
minutes goes off, the door can be
opened.
If the
“door”
light doesn’t flash, this
means that the machine is already
heating, that the water level is above
the bottom edge of the door or that
the drum is turning. In this case the
door can not be opened.
If you cannot open the door but you
need to open it you have to switch the
machine off by turning the selector dial
to
“O”
. After about 2 minutes the door
can be opened
(pay attention to the
water level and temperature!)
.
At the end of the programme
The machine stops automatically.
If the
“rinse hold”
option has been
selected, the phase lights
“end”
and
“door”
illuminate, the
“start pause”
light goes off and the door remains
locked to indicate that the water must
be emptied out before opening the
door.
To empty out the water please read
the steps on the Rinse Hold option
paragraph.
Turn the programme selector dial to
“O”
to switch the machine off.
Remove the laundry from the drum and
carefully check that the drum is empty.
If you do not intend to carry out
another wash, close the water tap.
Leave the door open to prevent the
formation of mildew and unpleasant
smells.
126.2931.23…EWF6120W.qxd:- 10/03/09 15:42 Página 40
Summary of Contents for EWF 6120 W User
