background image

Extra Rinse

This appliance is designed to save energy. If
it necessary to rinse the laundry using an ex-
tra quantity of water (extra rinse), select this
option. Some additional rinses will be per-
formed. This option is recommended for
people who are allergic to detergents, and in
areas where the water is very soft.

Delay Start

The programme can be delayed from 30 min
- 60 min - 90 min, 2 hours and then by 1 hour

up to a maximum of 20 hours by means of
this button.

Start Pause

This button allows you to start or to interrupt
the selected programme.

Time Manager

These buttons allows you to modify the pro-
gramme duration automatically proposed by
the appliance.

Display

2.1 2.2 2.3

2.4 2.5

2.6 2.7 2.8

2.9

2.12

2.11 2.10

The display shows the following information:

2.1:

 Temperature value

2.2:

 Temperature icons   , Cold 

 .

During the washing cycle the display shows
the temperature icon animated to indicate
that the appliance has started the heating
phase of the water in the tub.

2.3:

 Spin value

2.4:

 Spin speed icons.

• No spin 
• Rinse Hold 
• Night Cycle 
During the spinning phase the spiral is ani-
mated.

No spin

 option eliminates all the spin phases

and increases the number of rinses for some
programmes.

Rinse Hold:

 by selecting this option the wa-

ter of the last rinse is not emptied out to pre-
vent the fabrics from creasing. When the pro-
gramme has finished the display shows
flashing 

 , the icon 

2.8

 is still visualized,

the light of button 

8

 is off and the door is

locked to indicate that the water must be
emptied out. To empty out the water, please
read the paragraph «At the end of the pro-
gramme».

Night Cycle:

 by selecting this option, the

machine will not drain the water of the last
rinse, so as not to wrinkle the laundry. As all
spinning phases are suppressed, this wash-

ing cycle is very noiseless and it can be se-
lected at night or in times with a more eco-
nomical power rate. On some programmes
the rinses will be performed with more water.
When the programme has finished, the dis-
play shows flashing 

 , the icon 

2.8

 is

still visualized, the light of button 

8

 is off and

the door is locked to indicate that the water
must be emptied out. To empty out the wa-
ter, please read the paragraph «At the end of
the programme».

2.5:

 

Option icons

 : Extra Rinse 

 or Easy

Iron 

 .

2.6:

 

Delay icon

 

The selected delay set by pressing the rele-
vant button appears on the display for a few
seconds, then the duration of the previously
selected programme is displayed. The rele-
vant icon is lighted on. The delay time value
decreases by one unit every hour and then,
when 1 hour remains, the time decreases
every minute.

2.7:

 

Child safety lock

 

 (see «Personali-

sation» chapter).

2.8:

 

Door locked icon

 

After you have pressed button 

8

 and the ma-

chine has started, this icon is lighted on and
only the phase running icon stays on. When
the programme has finished, three flashing
zeros ( 

 ) are displayed and this icon

disappears.

 electrolux

Summary of Contents for EWF 168540 W





























Reviews: