background image

15

Change Spin Speed / Select Rinse Hold

If necessary, change the spin speed for the final spin/
select RINSE HOLD (Spülstopp, Arrêt Cuvé Pleine): 

Press the button Spin speed/RINSE HOLD (Spül-
stopp, Arrêt Cuvé Pleine) as often as necessary until
the display for the required spin speed or of RINSE
HOLD (Spülstopp, Arrêt Cuvé Pleine) lights up. 

If RINSE HOLD (Spülstopp, Arrêt Cuvé Pleine) is
selected, the washing remains in the last rinsing
water and is not spun.

3

If you do not change the spin speed, the
final spin is automatically adapted depend-
ing on the washing program:

The speed of the intermediate spin depends on the
selected program and cannot be changed.

Set the delay timer/soaking duration

Delay timer

The button DELAY TIMER (Zeitvorwahl, Départ
Différé) enables you to delay the start of a washing
program between 1 and max. 19 hours.
To do this, press the button DELAY TIMER (Zeitvor-
wahl, Départ Différé) as often as necessary until the
required start delay is shown in the Multi-display, e.g.
in the form 

12h

 to delay the program start for

12 hours.
If 

19h

 is displayed and you press again, the run time

of the washing program set appears (display in min-
utes, e.g. 

125

). In this state, the delay timer is not set.

Soaking duration

With the SOAKING (Einweichen, Trempage) button
pressed, you can extend the soaking duration with
the button DELAY TIMER (Zeitvorwahl, Départ
Différé) from 1 to max. 19 hours. 

3

Without delay timer, the soaking duration is
approx. 1 hour.

COTTONS/LINEN
(Koch-/Buntwäsche, Couleurs)

1400 rpm

EASY-CARES/EASY IRON
(Pflegeleicht, Textiles Melanges/
Leichtbügeln, Fâcile à Repasser)

1200 rpm

DELICATES (Feinwäsche, Délicat

1200 rpm

WOOL (Wolle, Laine)/

P

 (Handwasch) 1200 rpm

SILK (Seide, Soie)/

P

 (Handwasch)

1200 rpm

Summary of Contents for EWF 1480

















































Reviews: