Select the required programme by
turning the programme selector dial (1)
Turn the programme selector dial to the re-
quired programme. The washing machine
will propose a temperature and automatically
select the maximum spin value provided for
the programme you have chosen. You can
change these values by operating the corre-
sponding buttons. The
green
pilot light of the
button
8
starts to flash.
The selector dial can be turned either clock-
wise or counterclockwise. Turn to position
to reset programme/Switching the ma-
chine off.
At the end of the programme the selec-
tor dial must be turned to position
, to
switch the machine off.
Caution!
If you turn the programme
selector dial to another programme
when the machine is working, the
red
pilot light of button
8
will blink 3 times
and the message
Err
is displayed to
indicate a wrong selection. The machine
will not perform the new selected
programme.
Select the temperature by pressing
button 3
By selecting a programme, the appliance
proposes automatically a default tempera-
ture.
Press this button repeatedly to increase or
decrease the temperature, if you want your
laundry to be washed at a different temper-
ature.
Reduce the spin speed by pressing
button 4
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button
4
repeatedly to change the spin
speed, if you want your laundry to be spun at
a different speed.
Select the available options by pressing
buttons 4, 5 and 6
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before pressing button
8
.
When these buttons are pressed, the corre-
sponding icons appear on the display. When
they are pressed again, the icons disappear.
If an incorrect option is selected, the integra-
ted
red
pilot light of the button
8
flashes for
3 times and the
Err
message appears on the
display for a few seconds.
For the compatibility among the washing
programmes and the options see chap-
ter «Washing Programmes».
Select the Delay Start by pressing
button 7
Before you start the programme, if you wish
to delay the start, press the button
7
repeat-
edly, to select the desired delay. The corre-
sponding icon
2.6
will appear on the display
in the upper part of the display.
The selected delay time value (up to 20
hours) will appear on the display a few sec-
onds, then the duration of the programme
will appear again.
You must select this option after you have set
the programme and before you press button
8
.
You can cancel or modify the delay time at
any moment, before you press button
8
.
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the but-
ton
7
.
3. Press button
8
:
– the machine starts its hourly count-
down.
– The programme will start after the se-
lected delay has expired.
electrolux
9
