background image

PROGRAMME SELECTOR DIAL

It allows you to switch the appliance on/off
and/or to select a programme.

TEMPERATURE

This button allows you to increase or de-
crease the washing temperature.

SPIN

By pressing this button you can change the
spin speed of the selected programme or
to select Rinse Hold option.

RINSE HOLD

By selecting this function the water of the
last rinse is not emptied out to prevent the
fabrics from creasing. Before opening the
door it will be necessary to empty out the
water. To empty out the water, please read
the paragraph «At the end of the pro-
gramme».

PREWASH

By selecting this option the machine per-
forms a prewash cycle before the main
wash phase. The washing time will be pro-
longed. This option is recommended for
heavily soiled laundry.

EXTRA RINSE

This appliance is designed to save energy.
If it necessary to rinse the laundry using an

extra quantity of water (extra rinse), select
this option. Some additional rinses will be
performed. This option is recommended for
people who are allergic to detergents, and
in areas where the water is very soft.

DELAY START

The programme can be delayed from 30
min - 60 min - 90 min, 2 hours and then by
1 hour up to a maximum of 20 hours by
means of this button.

START PAUSE

This button allows you to start or to inter-
rupt the selected programme.

TIME MANAGER

These buttons allows you to modify the
programme duration automatically pro-
posed by the appliance.

DOOR LOCKED PILOT LIGHT

The pilot light 

9

 illuminates when the pro-

gramme starts and indicates if the door can
be opened:
• light on: the door cannot be opened. The

machine in working or has stopped with
water left in the tub.

• light off: the door can be opened. The

programme is finished or the water has
been emptied out.

• light flashing: the door is opening

FIRST USE

• Ensure that the electrical and water

connections comply with the installa-
tion instructions.

• Remove the polystyrene block and

any material from the drum.

• Before the first wash, run a cotton

cycle at the highest temperature

without any laundry in the machine,
to remove any manufacturing residue
from the drum and tub. Pour 1/2 a
measure of detergent into the main
wash compartment and start the
machine.

PERSONALISATION

ACOUSTIC SIGNALS

The machine is provided with an acoustic
device, which sounds in the following ca-
ses:
• at the end of the cycle
• if there is a fault.
By pressing the 

4

 and 

5

 buttons simultane-

ously for about 

6 seconds

, the acoustic

signal is deactivated (except if there is a
fault). By pressing these 2 buttons again,
the acoustic signal is reactivated.

CHILD SAFETY LOCK

This device permits you to leave the appli-
ance unattended and not to worry that chil-
dren might be injured by or cause damage

electrolux 

7

Summary of Contents for EWF 147443 W





























Reviews: