24
24
Something not working?
Problems which you can resolve yourself.
During machine operation it is possible that one of the following messages appear on the display:
- Problem with the water supply:
“No incoming water. Check tap & hose”
- Problem with water draining
“No drain. Check drain hose /filter”
- Door open:
“Door not closed. Please check”
Once the problem has been eliminated, press the Start/Add clothes button
to restart the programme. If after
all checks, the problem persists, contact your local Service Centre.
Problem
Possible cause
• The machine does not start up:
• The door is not firmly closed.
( “Door not closed. Please check”)
• The machine is not plugged in or there is no power
at the socket.
• The main fuse has blown.
• The Start/ Add Clothes button
has not been
pressed.
• The DELAY START option has been selected.
• The programme selector dial is not positioned.
• The machine does not fill:
• The water tap is closed.
(“No incoming water. Check tap & hose”)
• The inlet hose is squashed or kinked.
(“No incoming water. Check tap & hose”)
• The filter in the inlet hose is blocked.
(“No incoming water. Check tap & hose”)
• The door is not properly closed.
(“Door not closed. Please check”)
• The machine fills then empties
immediately:
• The end of the drain hose is too low. Refer to
relevant paragraph in “water drainage” section.
• The machine does not empty
and/or does not spin:
• The drain hose is squashed or kinked.
(“No drain. Check drain hose /filter”)
• The RINSE HOLD option
, NIGHT CYCLE
or NO SPIN «
O
» has been selected.
• The laundry is not evenly distributed in the drum.
• The drain pump is clogged.
(“No drain. Check drain hose /filter”)
• There is water on the floor:
• Too much detergent or unsuitable detergent
(creates too much foam) has been used.
• Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it
is damp.
• The drain hose is damaged.
• The cap on the emergency emptying hose has not
been replaced after cleaning the pump.
1-25 ES Mac64.indd 24
1-25 ES Mac64.indd 24
3/4/06 12:45:50 AM
3/4/06 12:45:50 AM
