background image

Incorrect option selection

If an option which is not compatible with
the set wash programme is selected, the
message 

Err

 is displayed at the bottom of

the display for a few seconds and the in-
tegrated red light of button 

8

 start flashing.

End of programme

When the programme has finished three
flashing zeros are displayed, the pilot light

9

 and the pilot light of button 

8

 go out and

the door can be opened.

7.2: 

 

Washing programme phase icons

• Wash 
• Rinses 
• Drain 
• Spin 
By selecting the wash programme, the pro-
gramme phase icons corresponding to the
various phases making up the programme

are shown in the bottom part of the display.
After having pressed button 

8

 only the icon

of the running phase stays on.

7.3: 

 

Heating phase

During the washing cycle the display shows
a temperature icon indicating that the appli-
ance has started the heating phase of the
water in the tub.

7.4: 

 

Soil degree icons

When selecting a programme on the display
appears an icon indicating the degree of soil-
ing automatically proposed by the machine:
• Intensive 
• Normal/Daily 
• Light/Quick 
• Super Quick 

7.5: 

 

Child safety lock

This device permits you to leave the appli-
ance unattended during it's functioning,

First use

• Ensure that the electrical and water

connections comply with the installa-
tion instructions.

• Remove the polystyrene block and

any material from the drum.

• Before the first wash, run a cotton cy-

cle at the highest temperature without

any laundry in the machine, to remove
any manufacturing residue from the
drum and tub. Pour 1/2 a measure of
detergent into the main wash com-
partment and start the machine.

Personalisation

Acoustic signals

The machine is provided with an acoustic
device, which sounds in the following cases:
• at the end of the cycle
• if there is a fault.
By pressing the 

4

 and 

5

 buttons simultane-

ously for about 

6 seconds

 , the acoustic

signal is deactivated (except if there is a fault).
By pressing these 2 buttons again, the
acoustic signal is reactivated.

Child safety lock

This device permits you to leave the appli-
ance unattended and not to worry that chil-
dren might be injured by or cause damage to

the appliance. This function remains enabled
also when the washing machine is not work-
ing.
There are two different ways to set this op-
tion:
1. Before pressing button 

8

 : it will be im-

possible to start the machine.

2. After pressing button 

8

 : it will be impos-

sible to change any other programme or
option.

To enable or disable this option press simul-
taneously for about 6 seconds buttons 

5

 and

6

 until on the display, the icon 

 appears or

disappears.

Daily use

Load the laundry

Open the door by carefully pulling the door
handle outwards. Place the laundry in the
drum, one item at a time, shaking them out
as much as possible. Close the door.

electrolux 

 7

Summary of Contents for EWF 12570 X





























Reviews: