background image

onds. The option is permanently activated,
even if the appliance is switched off. To de-
activate it, repeat the process.

“DELAY START” 

This option allows you to delay the start of a
wash programme by 3, 6 or 9 hours by
pressing the “Delay start” 

 pushbutton.

You can change or cancel the delayed start
time at any time before you press the
“Start/Pause” 

 pushbutton by pressing

the “Delay start” 

 pushbutton again

(when all indicators are off, the wash pro-
gramme will start immediately).
If you have already pressed the “Start/
Pause” 

 pushbutton and you want to

change or cancel the delayed start, pro-
ceed as follows :
• To cancel the delay start and start the cy-

cle immediately, press “Start/Pause” 
and then “Delay start” 

 . Press “Start/

Pause” 

 to start the cycle.

• To change the timer delay period, you

must go through the “Stop” position 
and reprogramme your cycle.

The lid will be locked during the delayed
start time. If you need to open it, you must
first pause the appliance by pressing the
“Start/Pause” 

 pushbutton. After closing

the lid again, press the “Start/Pause” 
pushbutton.

START OF THE PROGRAMME

Press the “Start/Pause” 

 pushbutton to

start the cycle. The corresponding light will
come on green.
It is normal for the programme selector to
remain stationary during the cycle. The light
corresponding to the current cycle is illumi-
nated.

 + 

 : P Wash

 + 

 : Spin

 : End of cycle

The drain pump can operate for a short
time when the appliance fills water.

INTERRUPTING A PROGRAMME
Adding washing during the first 10 mi-
nutes

Press the “Start/Pause” 

 pushbutton :

the corresponding light will flash green while
the appliance is paused. The lid can only be
opened around 2 minutes after the washing
machine has come to a stop. Press the
“Start/Pause” 

 pushbutton again to con-

tinue the programme.

Modifying the programme in progress

Before making any changes to the current
programme, you need to pause the wash-
ing machine by pressing the “Start/Pause”

 pushbutton. If the modification is not

possible, the “Start/Pause” 

 pushbutton

flashes red for a few seconds. If you still de-
cide to change the programme, you must
cancel the current programme (see below).

Cancelling the programme

If you want to cancel the programme, turn
the programme selector to the “Stop” posi-
tion   .

END OF THE PROGRAMME

The washing machine stops automatically,
the “Start/Pause” 

 pushbutton goes out

and the light “End of cycle” 

 comes on.

The lid can only be opened around 2 mi-
nutes after the washing machine has come
to a stop. Turn the programme selector to
the “Stop” position   . Remove washing.
Unplug and close water inlet tap.

PROGRAMMES TABLE

Programme / Type of washing

Load

Possible options

 

Cottons (cold - 90°) : 

White or colour,

e.g. normally soiled work clothes, bed linen,
table linen, body linen, towels.

6,0 kg

Rinse hold, Night silence plus, Pre-
wash, Daily, Super quick, Rinse plus,
Delay start

 

Synthetics (cold - 60°) :

 Synthetic

fabrics, body linen fab, coloured fabrics, non-
iron shirts, blouses.

2,5 kg

Rinse hold, Night silence plus, Pre-
wash, Daily, Super quick, Rinse plus,
Delay start

electrolux

Summary of Contents for EWB 76215 W













Reviews: