Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Старт/Пауза
button to
pause the appliance. The related
indicator flashes.
2. Touch the Отсрочка старта button
repeatedly until the display shows the
desired delay time.
3. Touch the Старт/Пауза
button
again to start the new countdown.
9.8 The UltraCare System load
detection
The programme duration in
the display is referred to a
medium/high load.
After touching the Старт/Пауза
button, the maximum declared load
indicator goes off, the UltraCare System
starts the laundry load detection:
1. The appliance detects the load in the
first 30 seconds. In the programmes
where Meнеджер времени is
available, during this phase the
Meнеджер времени bars
placed below the time digits play a
simple animation. The drum rotates
shortly.
2. The programme duration could be
adjusted accordingly and could
increase or decrease. After further 30
seconds, the water filling starts.
At the end of the load detection, in case
of drum overload, the indicator
is
flashing in the display:
In this case, for 30 seconds, it is possible
to pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Старт/Пауза
button to
start the programme again. The
UltraCare phase can be repeated up to
three times (see point 1).
Important! If the laundry amount will not
be reduced, the washing programme
starts anyway, despite the overload. In
this case, it will be not possible to
guarantee the best washing results.
About 20 minutes after the
programme start, the
programme duration could
be adjusted again depending
on the capacity of water
absorption of the fabrics.
The UltraCare detection is
carried out with complete
washing programmes only
and if the programme
duration has not been
reduced by means of the
Meнеджер времени button.
9.9 Interrupting a programme
and changing the options
When the programme is running, you
can change only some options:
1. Touch the button Старт/Пауза
.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Старт/Пауза
again.
The washing programme continues.
9.10 Cancelling a running
programme
1. Press the button Вкл/Выкл to cancel
the programme and to deactivate the
appliance.
2. Press the button Вкл/Выкл again to
activate the appliance.
www.electrolux.com
20