background image

acoustic signals operate (if they are
active). The display shows 

The indicator of the Aloita/Keskeytä 

button goes off.

The lid unlocks and the indicator 

goes off.

1. Press button Päällä/Pois to

deactivate the appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

shows the end of the

previous programme. Turn

the programme dial to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the lid and the detergent

dispenser slightly ajar to prevent

mildew and odours.

5. Close the water tap.

11.13 Draining water out after

end of cycle

If you have chosen a programme or an

option that does not empty out the water

of the last rinse, the programme is

completed, but:

• The time area shows 

 and the

display shows the lid locked 

.

• The drum still turns at regular

intervals to prevent creases in the

laundry.

• The lid stays locked.

• You must drain the water to open the

lid:

1. If necessary, touch the Linkous

button to decrease the spin speed

proposed by the appliance.

2. Press the Aloita/Keskeytä 

button:

• If you have set Rinse Hold 

 the

appliance drains the water and

spins.

• If you have set Hiljainen  the

appliance only drains the water

The option indicator Rinse Hold 

 and

Hiljainen  disappears.

3. When the programme is completed

and the lid locked indicator 

 goes

off, you can open the lid.

4. Press the Päällä/Pois  button for a

few seconds to deactivate the

appliance.

11.14 Stand-by option

The Stand-by function automatically

deactivates the appliance to reduce the

energy consumption when:
• You do not use the appliance for 5

minutes when no programme is

running.

Press the button Päällä/Pois to

activate the appliance again.

• 5 minutes after the end of the washing

programme.

Press the Päällä/Pois button to

activate the appliance again.

The display shows the end of the last

programme.

Turn the programme dial to set a new

cycle.

If the dial is rotated to the "Reset"
position  , the appliance automatically

turns off in 30 seconds.

If you set a programme or an

option that ends with water

in the drum, the Stand-by

function doesn't deactivate

the appliance to remind you

to drain the water.

12. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

12.1 The laundry load

• Divide the laundry into: white,

coloured, synthetics, delicates and

wool.

www.electrolux.com

26

Summary of Contents for EW7T6237F8









































Reviews: