background image

3. Make sure that all detergent residue

is removed from the upper and lower

part of the recess. Use a small brush

to clean the recess.

4. Insert the detergent drawer into the

guide rails and close it. Run the

rinsing programme without any

clothes in the drum.

12.7 Cleaning the drain pump

WARNING!

Disconnect the mains plug

from the mains socket.

Regularly check the drain

pump filter and make sure

that it is clean.

Clean the drain pump if:

• The appliance does not drain the

water.

• The drum does not turn.

• The appliance makes an unusual

noise because of the blockage of the

drain pump.

• The display shows the alarm code

.

WARNING!

• Do not remove the filter

while the appliance

operates.

• Do not clean the pump if

the water in the appliance

is hot. Wait until the water

cools down

Proceed as follows to clean the pump:
1. 
Open the pump cover.

1

2

2. Place a suitable bowl below the drain

pump access to collect the water that

flows out.

3. Open the chute downwards. Always

keep a rag nearby to dry up any

water spillages when removing the

filter.

www.electrolux.com

30

Summary of Contents for EW7F248S













































Reviews: