Electrolux EW6F6648Q8, User Manual

Page: 34 / 60

Every time you switch the
appliance on, the appliance
takes 45 seconds to connect
to the network automatically.
When the indicator stops
blinking the connection is
ready.
To switch the wireless connection off,
touch the and the
buttons
simultaneously for a few seconds until
the first acoustic signal. Release the
buttons.
appears on the display
for 5 seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the and the
buttons simultaneously for 10 seconds
until the second acoustic signal:
appears on the display.
11.3 Remote Start
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Start/Pause
button to start the
programme, but it is also
possible to start a washing
programme remotely.
When the App is installed and the
wireless connection is complete, you can
activate the Remote Start:
1. Touch the Remote button and the
indicator appears on the
display for a few seconds.
2. Touch the Start/Pause button to
activate the Remote Start before the
indicator
stops blinking.
The indicators and appear on the
programme summary screen and the
door is locked. Now it is possible to start
the programme remotely.
When touching the Start/
Pause
button after the
indicator stops
blinking, the Remote Start is
not activated, but the set
programme starts.
To remove the Remote Start, tap on the
Remote button and confirm by
pressing the Start/Pause
button.
The reset position
deactivates the Remote
Start.
11.4 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
Do not switch off or unplug the appliance
during update.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
www.electrolux.com 34