12
4. The water inlet hose filter
If it takes longer to fill up the washing machine it is time
to check the water inlet hose filter it may be clogged.
Turn off the water tap.
Unscrew the fixing nut of the inlet hose.
Remove the filter from the electrovalve and clean it with
a hard bristle brush and replace it.
Screw on the nut thoroughfully.
5. Emergency emptying out
If the water is not discharged (outlet pump is blocked,
filter or drain hose are clogged), proceed as follows to
empty out the machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• open the drainage area door;
• place a bowl to collect the water;
• release the emergency emptying hose, place it in the
bowl and remove its cap, when the bowl is full put the
cap back on the emergency emptying hose;
• empty the bowl, repeat the procedure until you have
completely emptied the washing machine;
• replace the emergency emptying hose in its initial
position and close the drainage area door.
P0090
P0021
