background image

12

Cooktop Main Control Pads

cooktoP Main PoWeR Pad

contRols lock Pad

The Cooktop 

POWER

 key pad enables the entire Cooktop. 

To power the cooktop, touch and hold the 

POWER

 key pad for 1/2 second. A beep will 

sound and the Power LED will glow (See Fig. 2). The cooktop will be in a ready mode 

for 10 seconds. If no other key pads are touched the Cooktop Main 

POWER

 will turn 

OFF automatically. 
To turn the Main Power OFF touch Main 

POWER

 key. A beep will sound and the Power 

Indicator Light will turn OFF (See Fig. 1).

CONTROLS LOCK

 - The Induction Cooktop may be locked in order to prevent the 

cooktop from accidentally being turned ON. 
To turn ON the Controls Lock feature, make sure the unit is powered OFF (See above, 

Figure 1). 

Touch and hold the 

LOCK

 key pad for 3 seconds. A beep will sound and the 

Lock indicator light will glow (Fig. 4). Once locked, no other displays will glow and no 

Cooking Zones will activate. 
To turn the Controls Lock OFF, touch and hold the 

LOCK

 key pad for 3 seconds. A 

beep will sound, the Lock indicator light will turn OFF (Fig. 3) and the cooktop may be 

used normally. Remember to power ON the cooktop if it is needed right away.

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 1

Fig. 2

Minute tiMeR Pad

The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping 

track of time. This feature will keep track of time from 1 to 99 minutes. The timer 

display will begin to count down minutes once set.

To  Set  the  Minute Timer  feature, 

touch  the  "

TIMER

"  key  (Fig.  5). Touching  and 

releasing the 

 or the 

 key pads (Fig. 6) will increase or decrease the Minute 

Timer setting by 1 minute with each key press (up to 

99

 minutes).

Once the Timer LED displays the desired amount of time, release the 

 or the   

Arrow key pads (Fig. 6). The Minute Timer will begin the countdown with remaining 

minutes. Once the Minute Timer reaches 1 minute, the timer will start counting down 

by seconds until 

00

 is reached. Once the Minute Timer reaches 

00

 a long beep will 

sound indicating that the time is up and the Timer display will flash 

00.

To cancel or turn OFF the Minute Timer, touch the "

TIMER

" key (Fig. 5).

usinG tHe toucH contRols

The recommended way to use the touch pads on the cooktop is with your finger 

placed in the center of the touch pad. If the finger is not placed on the center of a 

pad, the cooktop may not respond to the selection made.

Lightly contact the pad with the flat part of your entire fingertip. Do not just use the 

narrow end of your fingertip.

Summary of Contents for EW30IC60IS - 30" Induction Cooktop

























Reviews: