Detergent compartment for prewash phase.
Detergent compartment for washing phase.
Compartment for liquid additives (fabric conditioner, starch).
The mark
M
is the maximum level for the quantity liquid additives.
11.3 Setting a programme
1. Turn the programme knob and set
the programme:
• The indicator of the
flashes.
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an
option, the indicator of the set option
comes on.
If you set something
incorrect, the indicator
flashes red.
11.4 Starting a programme
without the delay start
Press the
.
• The indicator of the
stops to
flash and stays on.
• The programme starts, the lid
locks, the indicator
is on.
• The drain pump can operate for a
short time at the beginning of the
washing cycle.
11.5 Starting a programme with
the delay start
1. Press to set the delay you want to
set.
The indicator of the set delay is on. The
indicator is on.
2. Press
:
• The appliance starts the
countdown.
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the
.
To cancel the delay start :
a. Press
to set the appliance to
pause
b. Press until the indicator of the
set delay goes off.
Press
again to start the
programme immediately.
11.6 The AutoSense System
load detection
After touching the Start/Pauza
button:
The AutoSense System starts estimating
the weight of the load to calculate the
real programme duration. The appliance
automatically adjusts the programme
duration to the load to achieve perfect
washing results in the minimum possible
time
The AutoSense System is
not available with all
programmes such as : Vlna/
Hedvábí, Rychlý 14 min and
programmes with short
cycles.
11.7 Interrupting a programme
and changing the options
You can change only some options
before they operate.
1. Press
.
The indicator flashes.
2. Change the options.
3. Press
again.
The programme continues.
www.electrolux.com
18
