- 23 -
5. Select the temperature
Choose the temperature which corresponds to the chosen
programme, with the help or the indications of the pro-
gramme table, according to the fibers and the fastness of
the colours.
6. Select the programme
Choose the programme according to the nature and the
degree of soil of the laundry.
Turn the programme selector clockwise to select the chosen
programme.
Never turn the timer knob when the washing machine
is working.
7. Starting of programme
The ON/OFF pushbutton "
" enables to switch on your
machine. The control lamp lights on and the programme
begins.
8. At the end of the programme.
When the selected programme is over, the machine stops
automatically. The timer knob stops on the position "I" for
the cotton programmes and on the rinse hold position for the
synthetics programmes. You can end these programmes by
a spinning (programme G) or by a draining (programme R).
Please release the "
" on/off pushbutton before your
choice.
Be careful : a safety device enables to open the lid of your
waschine machine only about 2 minutes after the machine
has stopped.
After each wash:
depress the on/off pushbutton ; the control lamp lights
off.
press out the pushbutton ("
") if necessary
unplug the machine from the wall socket
turn off the water tap.
Operating instructions
1. Place the laundry in the drum
lift up the lid of the machine
open the drum with your two
hands by pressing the button A
and the two flapdoors till they
disengage
introduce the laundry into the
drum ; close the drum and the
lid of the machine
Be careful : before closing the lid of your machine, make
sure that the drum flapdoors are correctly closed :
- the two flapdoors fastened
- the button A pressed out.
2. Measure out the detergent
Measure out the amount of detergent recommended by the
manufacturer in the main wash compartment (bII).
If you wish to carry out a prewash, pour the amount required
into the prewash compartment (aI).
Do not exceed the MAX level.
If you wish to use liquid detergent :
choose a programme without prewash
put the measuring ball directly into the drum.
3. Add the fabric softener
Pour the softener, if required, into the compartment marked
c . Do not exceed the MAX level.
4. Press the half load "
" pushbutton if required.
A
