Electrolux EUFG28810W, User Manual

Page: 15 / 36

Removing the transport support
Your appliance is equipped with transport
support to secure the door during transpor-
tation.
To remove them do these steps:
1. Open the door.
2. Remove the transport support from the
door sides.
3. Remove the transport support from the
lower hinge (some models).
Important! Some models are fitted with a
silencing pad under the cabinet. Do not
remove this pad.
3
2
Rear spacers
Install the spacers provided within the ac-
cessory bag as shown in the figure.
When two appliances are placed beside
each other, attach the adhesive spacers be-
tween the appliances.
Install two spacers on the back side of the
panel and two spacers with adhesive on
the lower part.
Connecting the water hose.
Water supply should be provided with a tap
and 3/4" male connector within 1,5 m from
the appliance.
This work is to be carried out by a skilled
plumber.
There are different type-approved taps and
tap assemblies on the market.
The water hose must not be cracked,
squeezed or put in tight bends.
Before the appliance is placed its final loca-
tion, ensure that the water connection has
electrolux 15
Downloaded from Fridge-Manual.com Manuals