Electrolux EUF7000W1, User Manual

Page: 11 / 20

Problem Possible cause Solution
The compressor operates
continually.
Temperature is set incor‐
rectly.
Refer to "Operation" chapter.
Many food products were
put in at the same time.
Wait some hours and then
check the temperature
again.
The room temperature is
too high.
Refer to climate class chart
on the rating plate.
Food products placed in
the appliance were too
warm.
Allow food products to cool
to room temperature before
storing.
The door is not closed
correctly.
Refer to "Closing the door".
The ActionFreeze func‐
tion is switched on.
Refer to "ActionFreeze func‐
tion".
The compressor does not
start immediately after
pressing the ActionFreeze,
or after changing the tem‐
perature.
This is normal, no error
has occurred.
The compressor starts after
a period of time.
Water flows on the floor. The melting water outlet
is not connected to the
evaporative tray above
the compressor.
Attach the melting water out‐
let to the evaporative tray.
Temperature cannot be
set.
The ActionFreeze func‐
tion is switched on.
Switch off ActionFreeze
manually, or wait until the
function resets automatically
to set the temperature. Refer
to "ActionFreeze function".
Door is misaligned or inter‐
feres with ventilation grill.
The appliance is not lev‐
elled.
Refer to "Levelling".
The temperature in the ap‐
pliance is too low/too high.
The temperature regula‐
tor is not set correctly.
Set a higher/lower tempera‐
ture.
Food products placed in
the appliance were too
warm.
Allow food products to cool
to room temperature before
storing.
The door has been
opened often.
Open the door only if neces‐
sary.
The ActionFreeze func‐
tion is switched on.
Refer to "ActionFreeze func‐
tion".
There is no cold air circu‐
lation in the appliance.
Make sure that there is cold
air circulation in the appli‐
ance.
ENGLISH 11