If the cabinet is placed in a corner and the
side with the hinges facing the wall, the dis-
tance between the wall and the cabinet
must be at least 10 mm to allow the door to
open enough so that the shelves can be re-
moved.
Warning!
It must be possible to
disconnect the appliance from the
mains power supply; the plug must
therefore be easily accessible after
installation.
10mm
10mm
100mm
Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate cor-
respond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power sup-
ply socket is not earthed, connect the appli-
ance to a separate earth in compliance with
current regulations, consulting a qualified
electrician.
The manufacturer declines all responsibility
if the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Di-
rectives.
Door reversibility
Important!
To carry out the following
operations, we suggest that this be made
with another person that will keep a firm
hold on the doors of the appliance during
the operations.
To change the opening direction of the
door, do these steps:
1. Remove the plug from the power socket.
2. Dismantle the support foot (2) and the
lower hinge (1)
3. Dismantle the support foot (2) and the
lower hinge (1) on the opposite side.
1
2
4. Slide the door out from pin (G), unscrew
the pin and reposition on the opposite
side.
G
5. Reassemble the door.
6. Reassemble the lower hinge (1), and the
support foot (2) on the opposite side.
electrolux
9
