Electrolux EU 1130 T, Instruction Booklet

Page: 8 / 20

8
The freezer compartment will become progressively
covered with frost. This should be removed with the
special plastic scraper provided, whenever the
thickness of the frost exceeds 1/4".
During this operation it is not necessary to switch off
the power supply or to remove the foodstuffs.
However, when the ice becomes very thick on the
inner liner, complete defrosting should be carried out
and it is advisable to carry out this operation when the
appliance is empty.
To carry out complete defrosting proceed as follows:
1. Remove any stored food, wrap it in several layers
of newspaper and put it in a cool place.
2. Turn the thermostat control
➄
to the «O» setting.
3. Leave the door open and insert the plastic scraper
in the special location to act as an extension
channel; pull out the drawer to collect the defrost
water (see Fig.).
4. When defrosting is completed, dry the interior
thoroughly.
Keep the scraper for future use.
Turn the thermostat control to a medium setting
between 2 and 4 and push in the «fast freeze» control
knob. After letting the appliance run for at least two
hours in the «fast freeze» mode, replace the
previously removed food into the compartments.
Do not forget to release the «fast freeze» control knob
when you replace the food in the freezer.
Important
A temperature rise of the frozen food packs
during defrosting may shorten their storage life.
Never use sharp metal tools to scrape off frost
from the evaporator as you could damage the
appliance beyond repair.
PR001
DEFROSTING