Electrolux ETG7256GKR, User Manual, Page: 7 / 36

Installation instructions
Follow below steps to install the appliance.
1. Open the package, take out the ployfoam and place them on the even ground.
2. Install 4 hob support legs(supplied in accessory bag) on the 4 square yard by nut as below picture
shows.Make sure the glass panel is well protected when you assemble the hob feet, NOT contact
any sharp edge.
3.Assemble the burner caps on right position, assemble the trivets on right position
Please notice on ETG7276GKR and ETG7266GKR left trivet and right trivet are not the same,please
notice the location when you assemble the trivets.
Inner cap
right burner
Please notice on ETG7276GKR left burner inner cap and right burner inner cap are not the same,DO
NOT MISUSE
Inner cap
left burner
Location on trivet
Location on spill bowl
ETG7296GKR
ETG7286GKR
ETG7276GKR
ETG7266GKR ETG7256GKR