Electrolux ETB4600B, User Manual

Page: 12 / 36

CLEANING YOUR REFRIGERATOR
WARNING
BEFORE CLEANING: Turn the refrigerator off at the power
point and unplug the cord to prevent any chance of
electrocuting yourself.
Doors and exterior (white and silver):
You should only clean the doors with lukewarm soapy
water and a soft cloth.
Stainless Steel:
Your stainless steel refrigerator is manufactured from
mark-resistant stainless steel. This stainless steel has a
special advanced protective coating that eases the
removal of marks such as fingerprints and water spots. To
keep its appearance, clean it regularly with lukewarm
soapy water and a soft cloth.
CAUTION
Never use stainless steel cleaners, abrasive pads or other
cleaners that will scratch the surface. Damage to the
appliance after delivery is not covered by your warranty.
Interior
Clean the inside of your refrigerator regularly with a soft
cloth, unscented mild soap and lukewarm water.
Thoroughly dry all surfaces and removable parts and avoid
getting water on the controls. Replace removable parts,
plug power cord in and switch the power on before
returning the food.
Door seals
Always keep door seals clean by washing them with a mild
detergent and warm water, followed by a thorough drying.
Sticky food and drink can cause seals to stick to the cabinet
and tear when you open the door.
CAUTION
Never use hot water, solvents, commercial kitchen cleaners,
aerosol cleaners, metal polishes, caustic or abrasive
cleaners, or scourers to clean your refrigerator. Many
commercially available cleaning products and detergents
contain solvents that will damage your refrigerator. Use
only a soft cloth with an unscented mild soap and
lukewarm water.
To clean a crisper or freezer bin with telescopic extension
slides, simply wipe with a damp cloth and warm soapy
water. Never immerse the cover in water, as this could
affect the operation of the slide.
Switching off your refrigerator
If you switch off your refrigerator for an extended period,
follow these steps to reduce the chances of mould:
1. Remove all food.
2. Remove the power plug from the power point.
3. Thoroughly clean and dry the Interior.
4. Ensure that all the doors are wedged open slightly
for air circulation.
CAUTION
Never close the door while the telescopic slides are
extended. It may damage the slide and/or the refrigerator
or cause the slide to become disengaged from the
refrigerator.
Twist and Serve Ice
Mounting the twist & serve dispenser to the other side of
the freezer.
Note : This is only possible on top mount models.
1. Remove the ice
bin and ice cube
tray. If the ice tray
assembly is frozen to
the carriage, simply
squeeze the tray
and shelf together to
break the ice.
2. Before you remove the ice carriage, remember to
disengage it from the glass shelf as it may result in
damage to the assembly.
3. Remove the centre runner by disengaging it at the front
of the shelf, and removing it from the rear.
4. Refit the runner into the rear of the shelf on the right
hand side and then engage the front.
5. Fit the carriage by sliding it into the runners until the
front if the carriage engages with the shelf.
6. Refit the ice tray and ice bin.
WARNING
Fill the ice tube tray with potable water only.
CAUTION
LED lighting
Your appliance is fitted with long life LED lighting. In the
unlikely event the LED lights should fail, then the LED lights
should be serviced by the manufacturer.
Refer to the warranty page for contact details.
Insert Into the slot at the rear
of the shelf
Then engage Into the front
of the shelf
1 2 www.electrolux.com