How to activate the acoustic
signal for the end of
programme
Make sure the appliance is in user mode.
1. Press the programme button
immediately.
• The indicator
and are
on.
• The indicator
flashes.
2. Wait until the indicator
and
are off. The indicator
still
flashes.
• The
indicator shows the
current setting:
indicator off =
Acoustic signal off.
3. Press the programme button to
change the setting.
•
indicator on = Acoustic signal
on.
4. Press on/off confirm the setting.
6.4 AirDry
AirDry improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding
.
CAUTION!
If children have access to
the appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press the programme button twice.
• The indicators
and
are on.
• The indicator flashes.
2. Wait until the indicators
and
are off. The indicator still
flashes.
• The
indicator shows the
current setting:
off = AirDry is
deactivated.
3. Press the programme button to
change the setting.
•
on = AirDry is activated.
4. Press on/off to confirm the setting.
7. BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the
baskets.
After starting a programme, it may take
up to 5 minutes for the appliance to
recharge the resin in the water softener.
ENGLISH
9
