Make sure that there is
detergent in the detergent
dispenser before you start a
new programme.
5.7 Interrupting a programme
1. Open the appliance door.
The appliance stops.
2. Close the appliance door.
The programme continues from the point
of interruption.
5.8 Starting a programme with
Delay Start
1. Open the water tap.
2. Press the On / Off to activate the
appliance.
The On / Off indicator comes on.
3. Set a programme.
4. Press Delay Start to delay start of a
programme by up to 24 hours.
5. Close the door to start the
countdown.
When the countdown is completed, the
programme starts automatically.
5.9 Cancelling Delay Start
1. Open the appliance door.
2. Press Delay Start until 0 comes on.
3. Close the appliance door.
The programme starts automatically.
6. DAILY USE
6.1 Use of the appliance
1. Fill the salt container with salt for
dishwashers.
2. Fill the rinse aid dispenser with rinse
aid.
3. Load the basket.
4. Open the water tap.
5. Set the correct programme for the
type of load and the degree of soil.
6. Add the detergent.
7. Start the programme.
6.2 Filling the salt container
CAUTION!
Use only salt designed for
dishwashers.
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt
container (Only for the first time).
3. Use the funnel to fill the salt
container with dishwasher salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap of the salt container
clockwise to close the salt container.
Water and salt can come out
from the salt container when
you fill it, which causes
corrosion. To prevent it, start
a programme immediately
after filling the salt container.
6.3 The water softener
The water softener removes minerals
from the water supply, which would have
a detrimental effect on the washing
results and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
ENGLISH
9
