Electrolux ESL 6620RA, User Manual

Page: 9 / 20

How to activate the Multitab option
1.
Press the on/off button to activate the
appliance.
2. Press Multitab , the related indicator
comes on.
The option stays on until you deactivate it.
Press
Multitab , the related indicator goes
off.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1.
Deactivate the Multitab option.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6.
Adjust the released quantity of rinse
aid.
5.4 AutoOpen
This option gives good drying results with
less energy consumption.
This option is automatically activated
when you set the programme P1. The Au-
toOpen indicator comes on.
It is not possible to set this option with
other programmes.
• While the drying phase operates, a de-
vice opens the appliance door and
keeps it ajar.
• At the end of the programme, the de-
vice and the appliance door retract. The
appliance automatically deactivates.
CAUTION!
Do not try to close the appliance
door while the device keeps the
door ajar. This can cause damage
to the appliance.
If you want to deactivate the AutoOpen
option, press
AutoOpen . The related in-
dicator goes off.
In this condition, the energy consumption
of the programme increases.
5.5 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction or when the
adjustment of the level of the water soft-
ener occurs. It is not possible to deacti-
vate these acoustic signals.
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
How to activate the acoustic signal
for the end of programme
1.
Press the on/off button to activate the
appliance.
2.
Do the Reset function.
3. Press and hold, at the same time,
Program and MyFavourite until the
indicators of Delay, Program, MyFa-
vourite and TimeSaver start to flash.
4. Press MyFavourite .
• The indicators of Delay, Program
and TimeSaver go off.
• The indicator of MyFavourite contin-
ues to flash.
• The display shows the current set-
ting.
Acoustic signal on.
Acoustic signal off.
5. Press MyFavourite to change the
setting.
ENGLISH 9