Electrolux ESL 6610, User Manual

Page: 12 / 20

7.1 Using the detergent
20
30
M AX
1
2
3
4
+ -
A B
C
1. Press the release button ( B ) to open
the lid ( C ).
2. Put the detergent in the compartment
(
A ) .
3. If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appliance
door.
4. If you use detergent tablets, put the
tablet in the compartment (
A ).
5. Close the lid. Make sure that the re-
lease button locks into position.
7.2 Setting and starting a
programme
Setting mode
The appliance must be in setting mode for
some operations.
Press the on/off button to activate the ap-
pliance.
• The appliance is in setting mode if the
display shows, intermittently, the number
and the duration of the last programme.
• The appliance is not in setting mode if
the display shows only the duration of
the programme.
– Press and hold touchpads (
4 ) and ( 5 )
at the same time until the appliance is
in setting mode.
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance after a few minutes when:
• You have not closed the door to start the
programme.
• The programme is completed.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appliance
is in setting mode.
3. Press the Program touchpad again
and again until the display shows the
number of the programme you want to
set. Refer to the programme table.
• The display shows intermittently the
number and the duration of the pro-
gramme.
4. If you want, you can set the options
that are applicable to the programme.
Refer to the programme table.
5. Close the appliance door. The pro-
gramme starts.
• If you open the door, the display
shows the programme duration.
Starting a programme with delay
start
1. Set the programme.
2. Press the Delay touchpad again and
again until the display shows the delay
time you want to set (from 1 to 24
hours).
• The display shows intermittently the
programme number, the programme
duration and the delay time.
• The Delay indicator comes on.
3. Close the appliance door. The count-
down starts.
• If you open the door, the display
shows the countdown of the delay
start.
• When the countdown is completed, the
programme starts.
12 www.electrolux.com