Electrolux ESL 66022, User Manual

Page: 5 / 24

Control panel
1 On/Off button
2 Digital display
3 Delay start button
4 Programme selection buttons
5 Indicator lights
6 Function buttons
Indicator lights
Salt Comes on when the special salt has run out.
Rinse aid Comes on when the rinse aid has run out.
Multitab Indicates the activation/deactivation of the 'Multi-
tab function' (refer to 'Multitab function').
The digital display
The digital display indicates:
• the level of hardness to which the water
softener is set,
• the approximate remaining time of the run-
ning programme,
• activation/deactivation of the rinse aid dis-
penser ( ONLY with multitab function ac-
tive),
• the end of a washing programme (the dig-
ital display shows a zero),
• the countdown for the delay start,
• fault codes concerning malfunction of the
dishwasher,
• if the audible signals are activated/deacti-
vated.
Function buttons
The following functions can be set using
these buttons:
• setting the water softener level,
• cancelling a washing programme or a de-
lay start in progress,
• activation/deactivation of the multitab
function,
• activation/deactivation of the rinse aid dis-
penser when multitab function is active,
• activation/deactivation of the audible sig-
nals.
Setting mode
Press the on/off button; if ALL programme
button lights are on the appliance is in setting
mode.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– activating/deactivating the rinse aid,
– activating/deactivating the audible
signals,
the appliance MUST be in setting mode.
electrolux 5