15
Activating/deactivating the acoustic signal
The acoustic signal can indicate acoustically:
– at which water hardness the water softener is
set.
– when a dishwashing cycle has finished.
– when an error has occurred with the dish-
washer.
You can switch on/off the acoustic signal in the follow-
ing way:
1.
Press the ON/OFF button.
The LED indicators for all the buttons in the con-
trol panel that are now able to be selected will
become illuminated.
3
If the only LED indicator illuminated is one
that belongs to a programme button, this
means that this dishwashing cycle has been
activated. The dishwashing cycle must be
deselected (RESET):
Press function buttons
2
and
3
simultane-
ously for approx. 1 second.
The LED indicators for all the buttons in the
control panel that are now able to be
selected will become illuminated.
2.
Press function buttons
2
and
3
simultaneously
and keep them pressed.
The LED indicators for the function buttons
1
to
3
will flash.
3.
Press function button
3
.
The LED indicator for function button
3
will flash.
The
w
display will indicate the current setting:
4.
Pressing function button
3
will change the setting.
5.
Once the
w
display is indicating the required set-
ting, press the ON/OFF button. The setting is now
saved.
The
w
display is
continuously illumi-
nated:
Acoustic signal activated
(ex-factory setting)
The
w
indicator is
not flashing:
Acoustic signal deactivated
