background image

32 electrolux something not working

If after all these checks, the problem
persists, contact your local Service
Force Centre.

The wash results are not satisfactory

The dishes are not clean

The wrong washing programme has been selected.

The dishes are arranged in such a way as to stop water
reaching all parts of the surface. The baskets must not
be overloaded.

The spray arms do not rotate freely due to incorrect
arrangement of the load.

The filters in the base of the washing compartment are
dirty or incorrectly positioned.

Too little or no detergent has been used.

Where there are limescales deposits on the dishes; the
salt container is empty or the incorrect level of the water
softener has been set.

The drain hose connection is not correct.

The salt container cap is not properly closed.

The dishes are wet and
dull

Rinse aid was not used.

The rinse aid dispenser is empty.

There are streaks, milky
spots or a bluish coating
on glasses and dishes

Decrease rinse aid dosing.

Water drops have dries
onto glasses and dishes

Increase rinse aid dosing.

The detergent may be the cause. Contact the detergent
manufacturer’s consumer care line.

117989 54/0en  20-02-2007  15:12  Pagina 32

Summary of Contents for ESL 46010

















































Reviews: