Electrolux ESI66050, User Manual

Page: 26 / 48

26 electrolux daily use
Cancelling the "delay start"
To cancel a delay start in progress
you have to reset the dishwasher.
Simultaneously press and hold the
two programme buttons positioned
over the word Cancel, until all the
programme button lights will
illuminate.
Cancelling a delay start involves
also the cancelling of the washing
programme set. In this case you
have to set the washing
programme again.
Interrupt or cancel a washing
programme in progress ONLY if it’s
absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing programme in
progress:
●
Open the dishwasher door; the
programme will stop. Close the
door; the programme will start from
the point at which it was
interrupted.
●
Press the On/Off button, all lights
will turn off. Press the On/Off
button again; the programme will
start from the point at which it was
interrupted.
Cancel a washing programme in
progress
●
Simultaneously press and hold the
two programme buttons positioned
over the word Cancel, until all the
programme button lights illuminate.
The washing programme has been
cancelled.
If a new washing programme is to
be selected, check that there is
detergent in the detergent
dispenser.
End of the washing programme
●
The dishwasher will automatically
stop and the programme in
progress indicator light turns off.
●
The end of programme indicator
light will illuminate.
●
The light of the programme just
ended will remain on.
●
Zero appears in the digital display.
The dishwasher’s drying system is
provided with a device that allows air
to circulate inside the dishwasher to
prevent residual steam recondensing
on the dishes as water droplets.
Once the washing programme has
ended this device operates
intermittently for other 20 minutes,
as long as the dishwasher is
switched on.
If the On/Off button is pressed or the
door is opened during these 20
minutes, the device will be
automatically cancelled.
117990 24/0en 12-01-2007 12:18 Pagina 26