Electrolux Steam Iron ESI510 / ESI510T / ESI520 / ESI520T Operating Instruction
ENGLISH
4. Let the iron cool down before you store it.
F. Storage
1. Make sure the appliance is unplugged and set the steam control to position
2. Empty the water tank.
3. Store the iron on its heel in a safe and dry place.
G. Troubleshooting
This chapter summarizes the most common problems you could encounter with
your iron. If you are unable to solve the problem, contact the Consumer Care
Center in your country
No.
Problem
Cause
Solution
1
The soleplate
is cold even
when the iron
is plugged in
There is
connection
problem
Check the mains cord, plug and wall
socket.
The temperature
dial has been set
to MIN.
Set the temperature dial to the
required temperature.
2
The iron does
not produce
any steam
There is not
enough water in
the water tank.
Fill the water tank.(See chapter
“Using the appliance”)
The steam
control has been
set to position
Set the steam control to low steam
position to high steam position.( See
chapter “Using the appliance”)
3
Water leaks
from the
soleplate
during ironing.
The iron is not
hot enough.
Set the temperature dial to a
temperature suitable for steam
ironing(●● to MAX).Put the iron on its
heel and wait until the light has gone
out before you start ironing.
4
The spray
function does
not work.
There is not
enough water in
the water tank.
Fill the water tank.(See chapter
“Using the appliance”)
21
