background image

Electrical connection

• The appliance must be earthed.
• Make sure that the electrical information

on the rating plate agrees with the power
supply.

• Always use a correctly installed shock-

proof socket.

• Do not use multiple plugs and extension

cables. There is a risk of fire.

• Do not replace or change the mains ca-

ble. Contact the service centre.

• Make sure not to squash or cause dam-

age to the mains plug and cable behind
the appliance.

• Make sure that there is access to the

mains plug after the installation.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains
plug.

Only for UK and Ireland

. The appliance

has a 13 amp mains plug. If it is necessa-
ry to change the fuse in the mains plug,
use a 13 amp ASTA (BS 1362) fuse .

Internal lamp

This appliance has an internal lamp that
comes on when you open the door and
goes off when the door is closed.

Warning!

 Visible led radiation, do not

look directly into the beam.

The LED of the lamp is CLASS 2 and
agrees with IEC 60825-1: 1993 + A1:1997
+ A2:2001.

Emission wave length: 450 nm
Maximum emitted power: 548 

μ

W

To replace the internal lamp, contact
the service centre.
Disconnect the mains plug from the
mains socket before the replacement
of the internal lamp.

Service centre

• Only a qualified person can repair or work

on the appliance. Contact the service
centre.

• Use only original spare parts.

To discard the appliance

• To prevent the risk of injury or damage:

– Disconnect the mains plug from the

mains socket.

– Cut off the mains cable and discard it.
– Remove the door catch. This prevents

children or pets to be closed in the ap-
pliance. There is a risk of suffocation.

– Discard the appliance at the local

waste disposal centre.

Warning!

 

The dishwasher

detergents are dangerous and can
cause corrosion !

• If an accident occurs with these de-

tergents, contact immediately a
physician.

• If the detergent gets into the mouth,

contact immediately a physician.

• If the detergent gets into the eyes,

contact immediately a physician and
clean the eyes with water.

• Keep dishwasher detergents in a

safe area and out of children touch.

• Do not keep the appliance door

open when there is detergent in the
detergent dispenser.

• Fill the detergent dispenser only be-

fore you start a washing programme.

electrolux

Summary of Contents for ESI 67070





















Reviews: