Electrolux ESI 6700RAX, User Manual

Page: 10 / 20

6. Adjust the released quantity of rinse
aid.
5.5 EnergySaver
This option decreases the temperature in
the last rinse phase.
The use of this option decreases the ener-
gy consumption (up to 25%) and the pro-
gramme duration.
The dishes can be wet at the end of the
programme.
How to activate the EnergySaver
option
1.
Press EnergySaver . The related indi-
cator comes on. In the display you can
see the update of the programme du-
ration.
• If the option is not applicable to the
programme, the related indicator
flashes quickly 3 times and then
goes off.
5.6 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction. It is not pos-
sible to deactivate these acoustic signals.
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
How to activate the acoustic signal
for the end of programme
1.
Press the on/off button to activate the
appliance.
2. Press Reset for a few seconds.
3. Press and hold, at the same time, De-
lay and EnergySaver until the indica-
tors , and
start to flash.
4. Press Delay ,
• The indicators
and
go off.
•
The indicator continues to
flash.
• The display shows the current set-
ting.
Acoustic signal on
Acoustic signal off
5. Press Delay to change the setting.
6. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
6. BEFORE FIRST USE
1. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
If you use the combi detergent
tablets, activate the Multitab op-
tion.
10 www.electrolux.com