4. Press function button B.
– The indicator lights for function buttons
A and C go off.
– The indicator light for function button B
continues to flash.
5. Press function button B again.
– The end-of-programme indicator light
comes on.
6. Switch off the appliance to save the op-
eration.
To deactivate the rinse aid dispenser do the
above steps until the end-of-programme in-
dicator light goes off.
To use normal detergent again:
1. Deactivate the multitab function.
2. Fill the salt container and rinse aid
dispenser.
3. Adjust the water hardness setting to
the highest level.
4. Do a washing programme without
dishes.
5. Adjust the water softener to the wa-
ter hardness in your area.
6. Adjust the rinse aid dosage.
Setting and starting a washing programme
Set the washing programme with the
door ajar. The washing programme only
starts after you close the door. Until then
it is possible to modify the settings.
Do these steps to set and start a washing
programme:
1. Switch on the appliance.
2. Make sure that the appliance is in setting
mode.
3. Select a washing programme, refer to the
chapter 'Washing programmes'.
– The related programme indicator light
comes on while all the other pro-
gramme indicator lights go off.
– The programme-in-progress indicator
light comes on.
4. Close the door.
– The washing programme starts auto-
matically.
– The programme-in-progress indicator
light stays on.
When the washing programme oper-
ates, you cannot change the pro-
gramme. Cancel the washing pro-
gramme.
You can select the washing programme
and delay start also with the door closed.
When you press a programme button
you have only 3 seconds to select a dif-
ferent washing programme or a delay
start. After these 3 seconds, the selec-
ted programme starts automatically.
Warning!
Only interrupt or cancel a
washing programme if necessary.
Caution!
Open the door carefully. Hot
steam can come free.
Interrupting a washing programme
Open the door.
• The programme stops.
Close the door.
• The programme continues from the point
of interruption.
Cancelling a washing programme
1. Press and hold function buttons B and C
until all the programme lights come on.
– The programme-in-progress indicator
light goes off.
2. Release function buttons B and C to can-
cel the washing programme.
At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme .
Fill the detergent dispenser with detergent
before you set a new washing programme.
Setting and starting a washing
programme with delay start
1. Switch on the appliance.
2. Set a washing programme.
3. Press the delay start button until the in-
dicator light with the correct number of
hours starts to flash (3, 6 or 9 hours).
4. Close the door.
– The countdown of the delay start
starts.
– The programme-in-progress indicator
light goes off.
– The countdown of the delay start de-
creases with steps of 3 hours.
electrolux
13
www.markabolt.hu
