background image

Interrupt a washing programme in
progress

• Open the dishwasher door; the pro-

gramme will stop. Close the door; the pro-
gramme will start from the point at which
it was interrupted.

• Press the On/Off, all lights will go off. Press

the On/Off button again; the programme
will start from the point at which it was in-
terrupted.

Cancel a delay start or a washing
programme in progress

• Simultaneously press and hold the two

function buttons 

B

 and 

C

 until all the pro-

gramme lights come on and the digital dis-
play shows 3 horizontal bars.

• Cancelling a delay start will also cancel a

washing programme. You have to select
the washing programme again.

• If a new washing programme is to be se-

lected, check that there is detergent in the
detergent dispenser.

End of the washing programme

• The dishwasher will automatically stop and

the 

programme in progress

 indicator

light goes off.

• The 

End

 indicator light comes on.

• The light of the programme just ended will

remain on.

• The digital display goes off.
1. Switch off the dishwasher by pressing the

On/Off button.

2. Open the dishwasher door, leave it ajar

and wait a few minutes before removing
the dishes; this way they will be cooler
and the drying will be improved.

Unloading the dishwasher

• Hot dishes are sensitive to knocks. The

dishes should therefore be allowed to cool
down before removing from the appliance.

• Empty  the  lower  basket first and then the

upper one; this will avoid water dripping
from the upper basket onto the dishes in
the lower one.

• Water may appear on the sides and the

door of the dishwasher as the stainless

steel will eventually become cooler than
the dishes.

When the washing programme has
finished, it is recommended that the
dishwasher is unplugged and the
water tap turned off.

Washing programmes

Washing programmes

Programme

Degree of soil

Type of load

Programme description

 Intensive

Heavy soil

Crockery, cutlery,

pots and pans

Prewash
Main wash up to 70°C
2 intermediate rinses
Final rinse
Drying

 Auto 

1)

Any

Crockery, cutlery,

pots and pans

Prewash
Main wash up to 45°C or 70°C
1 or 2 intermediate rinses
Final rinse
Drying

 Quick 

2)

Normal or light

soil

Crockery and

cutlery

Main wash up to 60°C
Final rinse

 Eco 

3)

Normal soil

Crockery and

cutlery

Prewash
Main wash up to 50°C
1 intermediate rinse
Final rinse
Drying

16 

 electrolux

Summary of Contents for ESF65710





























Reviews: