Electrolux ESF63030, User Manual

Page: 29 / 44

something not working electrolux 29
Fault code Malfunction Possible cause Solution
The programme
does not start
●
The dishwasher’s
door has not been
properly closed
●
The main plug is
not plugged in
●
Delay start has
been set
●
The fuse has
blown out in the
household fuse
box
●
Close the door
●
Replace the fuse
●
Insert the main
plug
●
If dishes are to be
washed
immediately,
cancel the delay
start
Once these checks have been carried
out; close the dishwasher’s door and
switch on the appliance (remember to
position the programme knob in
correspondence with the programme
that was running before the
intervention of the alarm).
Press the start/cancel button.
The programme will continue from the
point at which it was interrupted.
If the malfunction or fault code
reappears contact the Service Force
Centre.
For other fault codes not described in
the above chart, please contact your
Service Force Centre.
Contact your local Service Force
Centre, quoting the model (Mod.),
product number (PNC) and serial
number (S.N.).
This information can be found on the
rating plate located on the side of the
dishwasher door.
So that you always have these
numbers at hand, we recommend you
to make a note of them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . .
PNC :. . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . .
156997 58/0en 26-10-2006 13:02 Pagina 29