background image

The upper basket 

The upper basket is designed for plates (dessert
plates, saucers, dinner plates of up to 24 cm in
diameter), salad bowls, cups and glasses; Glasses
with long stems can be placed upside down in the
raised cup racks. 
Larger plates (dinner plates up to 24 cm in
diameter) must be loaded in the front part of the
upper basket. 
Light items (plastic bowls etc.) should be loaded in
the upper basket and arranged so they do not
move. 

Before closing the door, ensure that the
spray arms can rotate freely. 

Adjusting the height of the upper
basket 

If washing very large plates (over 27 cm and up to
31 cm in diameter) you can load them in the lower
basket after moving the upper basket to the higher
position. 

To move to the higher position proceed as
follows:

1.

Move the front runner stops (A) of the upper 
basket outward and slide the basket out. 

2.

Refit the basket in the higher position and 
replace the stops (A) in their original position. 

When the top basket is in the higher position
it will only take plates up to 20 cm in diameter
and you will not be able to use the raised cup
racks. 

After loading your machine always close
the door, as an open door can be a
hazard.

11

PBA08GB

US17

IEC 436 / DIN 44990

US32

A

RC01

Summary of Contents for ESF610
























Reviews: