background image

It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move
house and leave the appliance, always ensure that the book is left with the appliance in order
that the new owner can get to know the functioning of the appliance and the relevant safety
information. 

This information has been provided in the interest of safety. You MUST read it carefully before
installing or using the appliance. 

Important safety information

3

PSI01GB

Installation

This appliance is heavy. Care should be taken 
when moving it. 

It is dangerous to alter the specifications or 
attempt to modify this product in any way. 

Care must be taken to ensure that the appliance
does not stand on the electrical supply cable. 

Any electrical work required to install this 
appliance should be carried out by a qualified 
electrician or competent person.

Any plumbing work required to install this 
appliance should be carried out by a qualified 
plumber or competent person.

Child safety 

This appliance is designed to be operated by 
adults.
Children should not be allowed to tamper with 
the controls or play with the product. 

Keep all packaging well away for children. 

Keep all detergents in a safe place out of 
children's reach. 

During use 

Items that are contaminated by petrol, paint,
steel or iron debris, corrosive, acidic or alkaline 
chemicals must not be washed in this 
dishwasher. 

Under no circumstances should you open the 
door whilst the appliance is in operation. Always 
turn off the appliance before opening the door. 

Only use detergent specifically designed for use 
in dishwashers. 

When finishing loading or unloading close the 
door, as an open door can be a hazard. 

Do not sit or stand on the open door. 

Isolate the appliance from the power supply and 
turn off the water supply after use. 

Care should be taken when cleaning the 
bottom door seal and hinge area as any 
exposed metal edges may cut if care is not 
taken. 

This product should be serviced by an 
authorised Service engineer, and only 
genuine spare parts should be used. 

Under no circumstances should you attempt 
to repair the machine yourself. Repairs 
carried out by inexperienced persons may 
cause injury or serious malfunctioning. 
Contact your local Service Force Centre. 
Always insist on genuine spare parts. 

Conservation 

In the interest of the environment: 

Materials marked with the symbol 

are 

recyclable. 

Check with your local Council or 
Environmental Health Office to see if there 
are facilities in your area for re-cycling this 
appliance. 

When the appliance is to be scrapped, cut 
off the power supply cable and make the 
door closing device unusable to prevent 
young children from being trapped inside. 

Help to keep your country tidy - use 
authorised disposal sites for your old 
appliance. 

Summary of Contents for ESF473
























Reviews: