4.
Add the detergent. If you use multi-
tablets, activate the option Multitab.
5.
Set and start the correct programme
for the type of load and the degree of
soil.
9.1
Using the detergent
30
20
A
B
D
C
20
30
B
A
D
C
1.
Press the release button (B) to open
the lid (C).
2.
Put the detergent, in powder or
tablets, in the compartment (A).
3.
If the programme has a prewash
phase, put a small quantity of
detergent in the compartment (D).
4.
Close the lid. Make sure that the
release button locks into position.
9.2
Setting and starting a
programme
The Auto Off function
This function decreases energy
consumption by deactivating automatically
the appliance when it is not operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
Starting a programme
1.
Press the on/off button to activate the
appliance. Make sure that the
appliance is in programme selection
mode.
2.
Close the appliance door.
3.
Press Program again and again until
the indicator of the programme you
want to select comes on.
• If you want to select the
MyFavourite programme, press
and hold Program until the
MyFavourite setting comes on.
The display shows the programme
duration.
4.
Set the applicable options.
5.
Press Start to start the programme.
• The washing phase indicator comes
on .
• The programme duration starts to
decrease with steps of 1 minute.
Starting a programme with delay
start
1.
Set a programme.
2.
Press Delay again and again until the
display shows the delay time you want
to set (from 1 to 24 hours).
The indicator of the selected programme
flashes.
3.
Press Start.
4.
Close the appliance door to start the
countdown.
When the countdown is completed, the
programme starts and the washing phase
indicator comes on.
Opening the door while the
appliance operates
If you open the door while a programme is
running, the appliance stops. When you
close the door, the appliance continues
from the point of interruption.
ENGLISH
13
