manualshive.com logo in svg

Electrolux ESF 68500, User Manual

Share
Download
Electrolux ESF 68500 User Manual Download Page 28

28 electrolux daily use

Set and start a washing programme

1. Check that the baskets have been

loaded correctly and that the spray
arms are free to rotate

2. Check that the water tap is opened

3. Close the dishwasher door.

4. Press the On/Off button; the

button illuminates.

The last performed washing
programme will be automatically
proposed.

5. Select the washing programme.

6. If required, postpone the start/end

time of the washing programme.

7. Set, if required, available options. 
8. When the Start button flashes

press it to start the running of the
programme. The Start button
remains illuminated during the
performance of the programme.

If in this phase, one or both of
the following messages are
displayed:

it is anyway possible to carry
out the washing programme by
pressing the OK button .

If the start/end of the programme has
been postponed, in the display will
appear the time duration of the
programme and the end time of the
programme.

Once the programme is running
the display shows: 

●

the phases of the progress of the 
programme,

●

updates the running time and the 
ending time of the programme.

Interrupt or cancel a washing
programme in progress ONLY if it’s
absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.

Interrupt a washing programme in
progress:

●

Open the dishwasher door; the
programme will stop. The following
message is displayed.

Close the dishwasher door; the
programme will continue from the
point at which it was interrupted.

●

Press the On/Off button.
Press again the On/Off button; the
programme will continue from the
point at which it was interrupted.

117996 87/0en  30-11-2006  17:55  Pagina 28

Summary of Contents for ESF 68500





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands