1)
Factory position.
2)
Do not use salt at this level.
You must adjust the water soften-
er manually and electronically.
Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
Electronic adjustment
1.
Press the on/off button to activate the
appliance.
2.
Press and hold, at the same time,
Program
and
TimeSaver
for a few
seconds.
3.
Press and hold, at the same time,
De-
lay
and
Option
until the indicators
,
and
start to flash.
4.
Press
Program
,
• The indicators and go off.
• The indicator continues to flash.
• The display shows the current set-
ting of the water softener. E.g.
= level 5.
5.
Press
Program
again and again to
change the setting.
6.
Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
6.2
Filling the salt container
1.
Turn the cap counterclockwise and
open the salt container.
2.
Put 1 litre of water in the salt contain-
er (only for the first time).
3.
Fill the salt container with dishwasher
salt.
4.
Remove the salt around the opening
of the salt container.
5.
Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it,
after you fill the salt container,
start a programme.
ENGLISH
29
