20
Cleaning the Panel
To be able to clean the control panel of the dish-
washer, it is possible to remove the Plexiglas cover
from the control panel.
Remove the Plexiglas Cover
1
Pull the mains plug of the dishwasher out of
the socket.
1. Close dishwasher door.
2. In the case of dishwashers with program switches,
set these switches to the horizontal position (only
turn them clockwise!).
3. There is a small recess in the bottom centre of the
Plexiglas cover. Insert a screwdriver into this
recess and carefully lift the Plexiglas cover
until
the hooks on both sides of the Plexiglas cover
spring out of the eyes of the control panel
.
1
Caution: When doing this, do not scratch the
control panel with the screwdriver.
4. Swivel the Plexiglas cover up and remove it.
5. Clean the control panel and the Plexiglas cover
with a cloth and hand detergent. Never use strong
cleaning agents.
Insert the Plexiglas Cover
1
The Plexiglas cover and the control panel
must be dry. The program switch must be
horizontal in the case of units with a program
switch.
1. With the door closed, press the Plexiglas cover up
into the joint of the control panel.
2. Slightly bend the Plexiglas cover so that the two
hooks of the Plexiglas cover fit into the eyes of the
control panel. It is best to begin with the left hook.
3. After pressing again in the upper part, check that
the Plexiglas cover is correctly fitted.
4. Turn the program switch clockwise into the zero
position in the case of units with a program switch.
5. Plug the mains plug back into the socket.
I
I
I
