Electrolux ESF 64075, User Manual, Page: 26 / 96

Water hardness
Water hardness ad-
justment
German degrees
(°dH)
French degrees
(TH°)
mmol/l Clarke de-
grees
manually elec-
troni-
cally
51 - 70 91 - 125 9,1 - 12,5 64 - 88
2
1) 10
43 - 50 76 - 90 7,6 - 9,0 53 - 63
2
1) 9
37 - 42 65 - 75 6,5 - 7,5 46 - 52
2
1)
8
29 - 36 51 - 64 5,1 - 6,4 36 - 45
2
1) 7
23 - 28 40 - 50 4,0 - 5,0 28 - 35
2
1) 6
19 - 22 33 - 39 3,3 - 3,9 23 - 27
2
1)
5
1)
15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4
11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3
4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2
< 4 < 7 < 0,7 < 5
1
2)
1
2)
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener
manually and electronically.
MANUAL ADJUSTMENT
Turn the water hardness dial to the position
1 or 2 (refer to the table).
ELECTRONIC ADJUSTMENT
1. Switch off the appliance
2. Press and hold the start/cancel button.
3. Turn the programme knob counter-
clockwise until the programme marker
agrees with the first available washing
programme on the control panel.
4. Release the start/cancel button when
the display shows the current adjust-
ment.
Example: the display shows
= level
5.
5. Press the start/cancel button to change
the adjustment. Each time you press
the start/cancel button, the adjustment
goes to the subsequent level.
6. Turn the programme knob to the off
position to keep the operation.
If the water softener is set electronically
to the level 1, the salt indicator light
stays off.
USE OF DISHWASHER SALT
How to fill the salt container:
1. Turn the cap counterclockwise and
open the salt container.
2. Fill the salt container with 1 litre of wa-
ter (only for the first time you fill with
salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from
the salt container when you fill it with
salt.
26 electrolux