25
2.
Keep pressing the DELAY TIMER button
ñ
until
the number of hours of delay until the wash pro-
gramme is to start are flashing on the multi-dis-
play.
3.
Press the button for the desired wash programme.
The multi-display now displays the number of
hours without flashing. The number of hours is
saved.
4.
The wash programme starts automatically at the
end of the delay set.
Changing the start delay:
As long as the wash programme has not started, you
can still change the start delay set by pressing the
DELAY TIMER button
ñ
.
Switching Off the Dishwasher
Do not switch off the dishwasher until the display
L
is illuminated.
If the acoustic signal has been switched on there will
be a continuous signal for 5 seconds at the end of the
wash programme.
1.
Press the ON/OFF button.
The display in the ON/OFF button will go out.
If the dishwasher is not switched off, the acoustic
signal is repeated after 10 minutes.
1
Hot steam may escape if the door is opened
immediately after the end of the programme.
Open the door carefully.
2.
Open the door.
Emptying the Dishwasher
3
•
Hot dishes can be sensitive to knocks. The dishes
should therefore be allowed to cool down before
removing them from the appliance.
•
Leave the dishes in the dishwasher for approx.
15 minutes after the end of the programme so that
they dry better and can cool down.
•
Empty the lower basket first, then the upper bas-
ket. This will avoid any water left on the upper bas-
ket dripping onto the dishes in the lower basket
and causing water spots.
1
Please note that when appliances are built in
beneath continuous work surfaces escaping
steam can damage the work surface. The
lower side of the work surface must be pro-
tected with aluminium foil in accordance with
regulations to prevent swelling.
