Electrolux ESF 6241 User Instructions Download

Page: 9 / 40

Control Panel

The

control panel

consists of the programme but-

tons with LED displays.

Function buttons:

In addition to the stated wash

programme the following functions can also be set
using these buttons:

The multi-display

can display,

– the start delay that is set.
– how long the current wash programme can be

expected to last.

– which fault has occurred on the dishwasher.
– the hardness setting to which the water sof-

tener is set.

– whether the rinse aid supply is switched on/off.

Indicators

have the following significance

Prior to using for the first time

Prior to using for the first time, remove all the clips
with which the dish racks are secured for transport.
Then perform the following steps:

Adjust the water softener

Filling with Special Salt for the Water Softener

Filling with Rinse Aid

Special salt and rinse aid must not be added
if you use 3-in-1 detergent tablets.

Multi-display

Control panel

Indicators

ON/OFF button

Set delay
start

Door handle

Function buttons

1 2

„3 in 1“
button

Function button

Adjust the

water softener

Function button

Switch

rinse aid supply

on and off

Function button

is not occupied

Function button

is not occupied

Refill with special salt

Refill with rinse aid

Summary of Contents for ESF 6241









































Search results

Summary of Contents for ESF 6241

Reviews:

Related manuals for ESF 6241

Brands by name

Popular brands

Electrolux ESF 6241, User Instructions

Search results

Summary of Contents for ESF 6241

Reviews:

Related manuals for ESF 6241

Brands by name

Popular brands