background image

26

Installation

This appliance is heavy. Care should be taken 
when moving it. 

It is dangerous to alter the specifications or 
attempt to modify this product in any way. 

Care must be taken to ensure that the appliance 
does not stand on the electrical supply cable. 

Any electrical work required to install this 
appliance should be carried out by a qualified 
electrician or competent person.

Any plumbing work required to install this 
appliance should be carried out by a qualified 
plumber or competent person.

Child Safety 

This appliance is designed to be operated by 
adults.
Children should not be allowed to tamper with the 
controls or play with the product. 

Keep all packaging well away from children. 

Keep all detergents in a safe place out of 
children's reach. 

During Use 

Items that are contaminated by petrol, paint, steel 
or iron debris, corrosive, acidic or alkaline 
chemicals must not be washed in this dishwasher. 

Under no circumstances should you open the 
door whilst the appliance is in operation. Always 
turn off the appliance before opening the door. 

Only use detergent specifically designed for use in 
dishwashers. 

Long bladed knives stored in an upright position 
are a potential hazard. 

Long and/or sharp items of cutlery such as 
carving knives must be positioned horizontally in 
the upper basket. 

When finishing loading or unloading close the 
door, as an open door can be a hazard. 

Do not sit or stand on the open door. 

Isolate the appliance from the power supply and 
turn off the water supply after use. 

Care should be taken when cleaning the bottom 
door seal and hinge area as any exposed metal 
edges may cut if care is not taken. 

This product should be serviced by an authorised 
Service engineer, and only genuine spare parts 
should be used. 

Under no circumstances should you attempt to 
repair the machine yourself. Repairs carried out 
by inexperienced persons may cause injury or 
serious malfunctioning. Contact your local Service 
Force Centre. Always insist on genuine spare 
parts. 

Conservation 

In the interest of the environment: 

Materials marked with the symbol 

are 

recyclable. 

Check with your local Council or Environmental 
Health Office to see if there are facilities in your 
area for re-cycling this appliance. 

When the appliance is to be scrapped, cut off the 
power supply cable and make the door closing 
device unusable to prevent young children from 
being trapped inside. 

Help to keep your country tidy - use authorised 
disposal sites for your old appliance. 

Important safety information

It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move house
and leave the appliance, always ensure that the book is left with the appliance in order that the new
owner can get to know the functioning of the appliance and the relevant safety information. 

This information has been provided in the interest of your safety. You MUST read it carefully before
installing or using the appliance. 

Summary of Contents for ESF 4120


























Reviews: