- 12 -
Service
Service and spare parts
Servicing and repairs must be carried out by a service
company authorised by the supplier. Use only spare
parts supplied by these.
Before calling service, use the trouble shooting table
”In the event of a fault” to try to attend to the fault yourself.
Note that electrical faults shall always be rectified by a
certified electrician.
State the appliance’s model designation, product- and
serial numbers according to the data plate affixed to the
rear of the dishwasher.
You can record these details here:
TYPE.
............................................................
MOD.
............................................................
PROD.NO.
............................................................
SER.NO.
............................................................
Purchase date............................................................
Under what circumstances does the fault occur?
Never attempt to repair the dishwasher yourself.
Repairs carried out by unauthorised or inexperienced
persons can cause injury or serious malfunctioning.
The salt container and rinse aid dispenser shall be filled in accordance with this instruction manual.
Before conducting the measurements the dishwasher shall be operated for one or two complete cycles using
detergent and a clean load.
Test standard:
EN 50242 and EN 60704
Rated capacity:
6 place settings accordance EN 50242
Loading of basket:
see chapter ”Loading the dishes”
Test program:
energy saving 55° C
Detergent (IEC type B):
9 gram in the dis 5 gram in the pre-wash dispenser
Rinse aid (type III):
setting 3
Feed water pressure:
minimum 0,8 bar, maximum 10 bar
Waste water outlet:
install according to figure below
Information for test centres
Summary of Contents for ESF 2440
Page 1: ......
Page 4: ...Description of the appliance 4 4 5 ...
Page 16: ...Technical changes possible ...