Electrolux ERW23900X, User Manual

Page: 8 / 24

Important: if the supply cord is dama-
ged, it must be replaced by a special
cord or assembly availa-ble from the
manufacturer or its service agent.
• If the appliance is transported ho-
rizontally, it is possible that the oil
contained in the compressor flows
in the refrigerant circuit. It is advi-
sable to wait at least two hours be-
fore connecting the appliance to
allow the oil to flow back in the
compressor.
• There are working parts in this pro-
duct which heat up. Always ensure
that there is adequate ventilation
as a failure to do this will result in
component failure and possible
food loss. See installation instruc-
tions.
• Parts which heat up should not be
exposed. Wherever possible the
back of the product should be
against a wall.
8 electrolux
Environment
Protection
This appliance does not contain
gasses which could damage the
ozone layer, in either its refrigerant
circuit or insulation materials. The
appliance shall not be discarded to-
gether with the urban refuse and
rubbish. Avoid damaging the coo-
ling unit, especially at the rear near
the heat exchanger. Information on
your local disposal sites may be
obtained from municipal authori-
ties.The materials used on this ap-
pliance marked by the symbol
are recyclable.