background image

4.

Do not pull the mains cable.

5.

If the power plug socket is loose,
do not insert the power plug. There
is a risk of electric shock or fire.

6.

You must not operate the appli-
ance without the lamp cover (if
foreseen) of interior lighting.

• This appliance is heavy. Care should be

taken when moving it.

• Do not remove nor touch items from

the freezer compartment if your hands
are damp/wet, as this could cause skin
abrasions or frost/freezer burns.

• Avoid prolonged exposure of the appli-

ance to direct sunlight.

• Bulb lamps (if foreseen) used in this ap-

pliance are special purpose lamps se-
lected for household appliances use
only. They are not suitable for house-
hold room illumination.

1.3 

Daily Use

• Do not put hot pot on the plastic parts

in the appliance.

• Do not store flammable gas and liquid

in the appliance, because they may ex-
plode.

• Do not place food products directly

against the air outlet on the rear wall. (If
the appliance is Frost Free)

• Frozen food must not be re-frozen once

it has been thawed out.

• Store pre-packed frozen food in ac-

cordance with the frozen food manu-
facturer's instructions.

• Appliance's manufacturers storage rec-

ommendations should be strictly ad-
hered to. Refer to relevant instructions.

• Do not place carbonated or fizzy drinks

in the freezer compartment as it creates
pressure on the container, which may
cause it to explode, resulting in damage
to the appliance.

• Ice lollies can cause frost burns if con-

sumed straight from the appliance.

1.4 

Care and cleaning

• Before maintenance, switch off the ap-

pliance and disconnect the mains plug
from the mains socket.

• Do not clean the appliance with metal

objects.

• Do not use sharp objects to remove

frost from the appliance. Use a plastic
scraper.

• Regularly examine the drain in the re-

frigerator for defrosted water. If neces-
sary, clean the drain. If the drain is
blocked, water will collect in the bottom
of the appliance.

1.5 

Installation

For electrical connection carefully
follow the instructions given in
specific paragraphs.

• Unpack the appliance and check if

there are damages on it. Do not con-
nect the appliance if it is damaged. Re-
port possible damages immediately to
the place you bought it. In that case re-
tain packing.

• It is advisable to wait at least four hours

before connecting the appliance to al-
low the oil to flow back in the compres-
sor.

• Adequate air circulation should be

around the appliance, lacking this leads
to overheating. To achieve sufficient
ventilation follow the instructions rele-
vant to installation.

• Wherever possible the back of the

product should be against a wall to
avoid touching or catching warm parts
(compressor, condenser) to prevent
possible burn.

• The appliance must not be located

close to radiators or cookers.

• Make sure that the mains plug is acces-

sible after the installation of the appli-
ance.

• Connect to potable water supply only (If

a water connection is foreseen).

1.6 

Service

• Any electrical work required to do the

servicing of the appliance should be
carried out by a qualified electrician or
competent person.

• This product must be serviced by an

authorized Service Centre, and only
genuine spare parts must be used.

4

www.electrolux.com

Summary of Contents for ERN 28700

























Reviews: